Reposition your instant center by changing your lower control arm angle for improved traction. Brackets lower the rear of the control arm up to 3". Product installed on a stock height vehicle will also see a great increase in traction by lowering the rearward angle of the lower control arm, allowing more force to be placed on the rear tires. Relocation brackets have two settings to allow the lower control arm to be lowered either 2" or 3", depending on your preference. Settings are placed in a correct pattern that will allow use of all OEM control arms or any aftermarket control arm (brackets do not require a longer control arm.) Brackets installed on a non-lowered F-Body provide a .10 or better 60-foot; reduction and an increase in track consistency.

Installation:
Brackets are Weld-in only and install in approximately 1 - 1� hours. All hardware and installation instructions are included with each kit.

Available for the following vehicles:
• Chevrolet Camaro & Pontiac Firebird, 1982-1992
• Chevrolet Camaro & Pontiac Firebird, 1993-1997
• Chevrolet Camaro & Pontiac Firebird, 1998-2002