2255 – 2016-2024 Camaro Caster/Camber Plates, Adj, Strut Mount
UMI Performance



$729.99

Shock Type
GM-Magnentic
Clear
2255 - 2016-2024 Camaro Caster/Camber Plates, Adj, Strut Mount quantity
1
Add to cart
Product Inquiry
⚠ See fitment note
Add to wishlist
Compare
SKU: 2255-3
Tag: UMI Performance
Share:
Installation Instructions
Alignment Upgrade
2255 – 2016-2024 Camaro Caster/Camber Plates, Adj, Strut Mount
Race-level alignment control from the engine bay. Precision-machined 2024 aluminum plates add up to 1.25 degrees of camber and 1.75 degrees of caster without wheel removal.

Caster & Camber Adjust
Engine Bay Adjust
2024 Aluminum
Spherical Bearings
✓
True caster and camber adjustments for aggressive track alignments
✓
Track-friendly workflow — adjust from the engine bay with hand tools
✓
Premium 2024 aluminum with hard-anodized finish for high strength
✓
Multi-strut compatibility works with Viking, Koni, and factory struts
Quick Overview
At a glance
Fitment: 2016-2024 Chevrolet Camaro

Primary benefit: True caster and camber correction for street, autocross, and road course setups.

Install Difficulty
Moderate DIY

Camber Range
Up to 1.25 Degrees

Caster Range
Up to 1.75 Degrees

Material
2024 Aluminum

Description
What it solves
Elevate your 6th Gen Camaro's front suspension with UMI's 2255 Caster/Camber Plates. These premium adjustable plates allow you to dial in your alignment far beyond factory limits, achieving approximately 1.25 degrees of additional camber and 1.75 degrees of caster. Constructed from high-strength 2024 aluminum, this kit offers race-level steering precision and tire wear control. The design enables fast, track-side tuning from the engine bay with simple hand tools, eliminating the need for frustrating wheel removal.

Designed for 2016–2024 Chevrolet Camaro models, the 2255 kit features heavy-duty interference press-fit spherical bearings and 4140 steel components for maximum durability. The plates are compatible with factory struts (including Magneride), Viking coilovers, and Koni shocks. Laser-etched markings ensure repeatable adjustments, while the hard-anodized finish delivers exceptional corrosion resistance. Designed, manufactured, and rigorously track-validated at UMI Motorsports Park, this kit brings 100% Made in USA quality to your Camaro.

Product Features
Key details
✓
Engine bay adjustments — no wheels off
✓
2024 aluminum construction
✓
Independent caster and camber adjustment
✓
Laser-etched alignment reference guides
✓
Viking, Koni, and factory strut compatible
✓
Interference press-fit spherical bearings
✓
100% Made in USA
⚠
Fitment Note: A MagneRide delete module is required when using Viking, Penske, or other aftermarket shocks when installed on vehicles equipped with factory MagneRide struts. This module bypasses the MagneRide system and eliminates error codes on the dash.
Detailed Features
Technical breakdown
✓
Engine bay adjustments: Make precise alignment changes trackside with basic hand tools—no need to remove the wheels. *(Note: Front toe alignment will need to be reset any time Caster/Camber is changed.)*
✓
2024 aluminum construction: CNC-machined from aerospace-grade alloy for an exceptional strength-to-weight ratio.
✓
True caster and camber: Offers up to 1.25 degrees of camber and 1.75 degrees of caster adjustment beyond factory specs.
✓
Laser-etched markings: Clear, permanent indicators ensure accurate, repeatable alignment changes between street and track setups.
✓
Multi-strut compatibility: Engineered to fit factory Magneride or non-Magneride struts, plus aftermarket Viking and Koni options.
✓
Heavy-duty spherical bearings: Interference press-fit mounts eliminate strut deflection for crisp, instantaneous steering response.
✓
Premium corrosion resistance: Features hard-anodized aluminum and zinc-plated 4140 steel components for long-lasting durability.
✓
Track-tested validation: Developed and rigorously proven on the road course at UMI Motorsports Park.

Product Outcomes
On-road impact
✓
Achieves aggressive alignment specs for maximum cornering grip and stability.
✓
Eliminates strut mount deflection for crisp, predictable steering response.
✓
Enables quick trackside tuning without wasting time removing wheels.
✓
Improves tire wear by correcting alignment on lowered 6th Gen Camaros.
Installation Summary
Before you buy
Overview & Difficulty: Moderate DIY install requiring standard and metric sockets, wrenches, an impact tool, and a brass hammer. Installation requires unbolting the top strut mounts and lower knuckle bolts (spin nuts only, gently tap out splined bolts). Magneride vehicles require disconnecting electrical plugs. Adjustments are made on the ground or lightly lifted using the top hex bolts. Torque lower knuckle bolts to 140 ft-lbs and top plate locknuts to 25 ft-lbs. A professional alignment is highly recommended, as front toe alignment will need to be reset any time Caster/Camber is changed.

What’s Included:
Driver side caster/camber adjuster assembly (2255DR) ×1
Passenger side caster/camber adjuster assembly (2255PA) ×1
Grade 8 flanged nyloc nuts and essential hardware
Is This Product Right for You?
Decision guide
UMI 2255 caster/camber plates transform 6th Gen Camaro alignment, allowing independent caster and camber adjustments from the engine bay to support aggressive driving styles.

Best For
✓
Track and autocross enthusiasts needing quick, repeatable alignment changes.
✓
Street performance builds correcting alignment after lowering the ride height.
✓
Drivers seeking precise steering feedback by eliminating factory rubber strut mounts.
Not Ideal For
×
Stock daily drivers who do not push their vehicle's cornering limits.
×
Beginners uncomfortable with removing front struts or managing spring compression.
Product FAQ
Quick answers
What vehicles do the UMI 2255 caster/camber plates fit?
+
Do these plates adjust both caster and camber?
+
Can I adjust alignment without removing the wheels?
+
What materials are used to build these plates?
+
Which strut options are compatible with these mounts?
+
How do these plates improve steering feel?
+
Are these plates protected against rust and corrosion?
+
Have these caster/camber plates been track tested?
+
THIS PRODUCT FEATURES

Designed & Manufactured in the USA


North American Raw Materials


Precision Laser Cut Components


Weight
11 lbs
Dimensions
12 × 6 × 6 in
Finish
Anodized
Adjustable
Yes
Fitment
2016-2024 Chevrolet Camaro
Materials: Aluminum, Chromoly
2016-2024 Camaro
Hardware Included
Direct Bolt-On
GM-Magne, Koni GTS, Viking

This product has multiple variants.

Available for the following vehicles:
• Chevrolet Camaro 2016+