Sport 4-point Mustang Roll Bar, no door bars, fixed harness mount, 2005-2014 hardtop

All roll bar tubes except the harness mounting tube are 1.75" diameter by 0.134" wall DOM tube (much stronger than the more commonly used 0.120" wall ERW seamed tubing).
All MM rollbars are constructed from 1020 mild steel for ease of welding.
Harness mounting tube is 1.5" by 0.134" wall DOM tube (this size exceeds the NHRA/NMRA minimum size requirement).
Contour-hugging 6" x 6" mounting pads with backup plates sandwich the unibody for safe and strong mounting.
All hardware is Grade 5 or higher.
Designed to fit with stock Mustang interior.
NO WELDING required inside a hardtop Mustang! (Some welding required for convertible models)

Diagonal Brace: Located in the plane of the main hoop, the welded-on diagonal brace greatly improves rollover protection and increases chassis rigidity. Made from 1-3/4" diameter by 0.134" wall DOM tube.

The 2005-2014 Mustang roll bars ship by UPS, not truck freight.
Shipping charges for 48-state standard delivery of MM roll bars is now standardized.
Residential: $150
Commercial: $100
For delivery outside the 48-state area, or any expedited shipping, we will contact you about the additional shipping charges. You must respond with approval of those additional charges before we will continue processing your order.
Important: The freight company defines what is and is not a commercial address, not you.
The freight company's decision is final; there is no appeal.
Please completely fill out your "Ship To" address. The information listed below is always required by the freight company. Providing it when placing your order will allow us to process your order in a timely manner, without extra back-and-forth communications.

Available for the following vehicles:
• Ford Mustang 2005-2009. SCCA CLUB SPEC